Free templates

COSHH assessment template

A COSHH assessment is required under the Control of Substances Hazardous to Health Regulations 2002 before work that could expose anyone to hazardous substances starts. This template covers the substance register, exposure evaluation, controls and health surveillance in one document, built around the safety data sheet for each product.

Who it's for: Anyone in a UK workplace responsible for chemicals, cleaning products, dusts or fumes, from site managers to facilities and practice managers.

Free to use and adapt · Last updated 2026-07-27 · No email required

Assessment details

Assessor name and role
Activity or process being assessed Assess the way substances are used, not just the substances themselves
Location
Date of assessment
Review date Review regularly, and immediately if the work or the products change

Substance register

One row per product. Take the hazard classification from section 2 of the safety data sheet (SDS). If you cannot obtain an SDS for a hazardous product, do not use the product.

Substance or productSDS dateHazard classificationRoute of exposureWho is exposed and how oftenWorkplace exposure limit (if listed in EH40)
      
      
      
      
      

Evaluate the exposure

How each substance is used and what that releases Spraying, pouring, heating and sanding create mists, vapours, fumes and dusts that the label alone does not show
Duration and frequency of exposure
Who else could be exposed Cleaners, maintenance, contractors, visitors, people nearby
Could substances combine or react e.g. bleach and acidic cleaners must never mix
Is exposure reliably below any workplace exposure limit If you cannot say, air monitoring may be needed

Controls, strongest first

  • Eliminate: stop using the substance, or change the process so it is not needed
  • Substitute: swap for a less hazardous product or a safer form, such as pellets instead of powder
  • Enclose the process, or extract at the source with local exhaust ventilation (LEV)
  • LEV thoroughly examined and tested at least every 14 months, with records kept
  • General ventilation improved where extraction at source is not practicable
  • Fewer people exposed, for less time
  • Safe storage: incompatible substances separated, containers labelled and closed
  • Spill kit and decontamination arrangements matched to the substances held
  • RPE as the last layer, with face-fit testing for tight-fitting masks
  • Gloves and skin care matched to the substance per section 8 of the SDS, with washing facilities available
  • Hygiene rules enforced: no eating, drinking or smoking in exposure areas

Health surveillance and monitoring

Is health surveillance required Required for certain substances and processes, such as those causing occupational asthma or dermatitis. Check the SDS and HSE guidance
Is air monitoring required Where exposure against a workplace exposure limit cannot otherwise be shown
Provider and frequency
Where records are kept Health records made under COSHH must be kept for at least 40 years

Emergency procedures

  • First aid measures from section 4 of each SDS are known to the first aiders
  • Eye wash and washing facilities within reach of the areas of use
  • Spill procedure written and the kit checked
  • Extinguisher types match the substances held, per section 5 of the SDS
  • Emergency contacts displayed, including poisons information
  • Exposure incidents: report, decontaminate, and arrange medical review
  • RIDDOR reporting understood for relevant occupational diseases
  • Other occupiers or neighbours warned where a release could affect them

Information, training and review

Everyone who could be exposed must be told what the substances are, what the risks are, and what the controls require of them, and be trained to use those controls, including any RPE. Records of that training belong with this assessment.

Review the assessment regularly, and straight away if the products, the process or the people change, if monitoring or health surveillance suggests the controls are not working, or after any exposure incident.

How to use it

Getting the most out of this template

  • List every hazardous product in the register, working from the shelf and the store, not from memory.
  • Collect a current SDS for each product and take the classification from section 2.
  • Work the controls hierarchy: try to eliminate or substitute before reaching for RPE.
  • Set up health surveillance and air monitoring where the substances call for it.
  • Share the findings with everyone exposed and review when products or processes change.

This template is general information, not legal advice. Requirements differ by jurisdiction and industry; check the guidance published by Safe Work Australia and your state WHS regulator and seek advice for your specific circumstances.

Questions

Frequently asked

Is a COSHH assessment legally required?
Yes, if the work could expose anyone to hazardous substances. Regulation 6 of the COSHH Regulations 2002 requires the assessment to be made before work liable to expose employees begins, and employers with 5 or more employees must record the significant findings.
Does COSHH cover every chemical?
No. It covers substances hazardous to health: products with a hazard warning label, dusts in significant quantities, fumes, vapours, mists, gases and biological agents. Asbestos, lead and radioactive substances have their own regulations and sit outside COSHH.
Where do I find the hazard information?
The safety data sheet. Section 2 gives the hazard classification, section 4 first aid, section 5 firefighting and section 8 exposure controls. Suppliers must provide an SDS for hazardous products; if you cannot get one, do not use the product.

The template covers the paperwork. Duress covers the response.